FREE WORLDWIDE SHIPPING + 60% OFF

Manual Instruction


USE STEPS FOR SMART POSTURE CORRECTOR

1. First, adjust the straps to the appropriate length.

2. Straighten your back after wearing Smart Posture Corrector, lift your head and raise your chest, then click on the switch, it will vibrate three times, and work properly.

3. Stay in the right position until the appliance vibrates three times.

4. At this point the smart chip has recorded your correct posture.
5. When you have a hunchback Radian of more than 25 degrees, the corrector will automatically senses vibration to remind you of your bad posture.

6. The corrector reminds you to raise your chest and raise your head by shaking.

 

CORRECTOR INDICATOR LIGHHT INDICATES

The blue light is always bright  Normal work 
The red light is always on  Need to charge
The blue light is always on   Full

 

FAQ

1. If the Corrector is insensitive, the straps can be properly tightened. At the same time, the back should be straight when initializing, and the chest should be expanded as far as possible.

2. If the Corrector is too sensitive, he straps can be properly, if it's due to the when correcting sitting posture , vibration is frequent, you can sit upright, reinitialize, and click boot.

3. If the Corrector fails to turn on, charge for 10 minutes first, or there is no response, you can contact us to help you.